sitebots
Job-specific robotAvailable to order

ConBotics MalerRoboter 2.0

by ConBotics · DE · Configuration: 2.0

Battery-powered painting robot from Berlin that sprays walls with any airless unit up to 3.2 m high while a painter prepares, masks and refills.

ConBotics MalerRoboter spraying a masked wall
Photo · From conbotics.comNo redistributable 3D model

Buy in Germany

checked 2026-10-02

Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.

Price on requestOrder on request

Made in Berlin; rented and ordered through the maker's contact form ("Order now", "Rent a Robot"). The FAQ still says sales start was planned for 2025 and rental is the main route; price on request.

Checked 2026-10-02. Maker’s page ↗

Key facts

All specifications
Moves on

Wheels

Height
Not published
Weight

140 kg

without airless unit; the same page also says 130 kg

Maker · conbotics.com ↗
Arms

1

Hands

Process tool

Payload per arm
Not published
Carry on body
Not published
Runtime

4 h

spec block; the FAQ says up to 8 h with a swappable battery

Maker · conbotics.com ↗
Max speed
Not published
Stairs
Not published
Outdoors
Not published
IP rating
Not published

Jobs

Tested in a pilot 1

  • Paint walls and ceilingsTested in a pilot · Nietiedt (painting and construction contractor), Germany

Did similar work 2

  • Apply EIFS facade panels and render in the plantDid similar work · Wall coating on a pilot project
  • Spray and level machine-applied gypsum plasterDid similar work · Wall coating on a pilot project

Specs fit 3

  • Apply bitumen thick coating (PMBC) to basement wallsWaterproofing
  • Apply the base coat and embed the reinforcing meshExternal insulation and render systems (ETICS)
  • Mix and apply repair mortar to prepared areasConcrete repair

Where it has worked

  • Tested in a pilot

    Wall coating on a pilot project · Nietiedt (painting and construction contractor), Germany

    ConBotics GmbH ↗
  • Tested in a pilot

    Painting robot used and advised on by a master painter · Malermeister Sachs (master painter)

    ConBotics GmbH ↗
  • Made for this work

    Wall coating in a new hospital building and in a garage and basement

    Maker describes these projects on its home page without naming the customer, so they are not counted as a named deployment.

    ConBotics GmbH ↗

Specifications

9 values

Specifications by configuration

1 configuration

What each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.

ConBotics MalerRoboter 2.02.09 specifications · 6 research gaps · reviewed Runtime 4 hShow all 9 specifications and capabilities
Dimensions
60 x 190 x 80 cmManufacturer sourceConBotics GmbH ↗ · checked
Spray height
3.2 mManufacturer sourceConBotics GmbH ↗ · checked
Total weight
140 kgManufacturer sourceConBotics GmbH ↗ · checked

without airless unit; the same page also says 130 kg

Paint bucket
35 lManufacturer sourceConBotics GmbH ↗ · checked

up to

Battery runtime
4 hManufacturer sourceConBotics GmbH ↗ · checked

spec block; the FAQ says up to 8 h with a swappable battery

Charging time
3.5 hManufacturer sourceConBotics GmbH ↗ · checked
Charge voltage
110-240 VManufacturer sourceConBotics GmbH ↗ · checked
Swappable battery
YesManufacturer sourceConBotics GmbH ↗ · checked

FAQ

Robots per operator
3Manufacturer sourceConBotics GmbH ↗ · checked

up to; 2 recommended

Capabilities and equipment

Legs
NoField-level source not recorded
Wheels
YesField-level source not recorded
Tracks
NoField-level source not recorded
Level floors
YesField-level source not recorded
Rough ground
Unknown
Stairs
Not applicable
Outdoor use
Unknown
Number of arms
1Field-level source not recorded
Hands or end effectors
ToolField-level source not recorded
Hands included
YesField-level source not recorded
Payload per arm
Unknown
Payload on body or base
Unknown
IP rating
Unknown
SDK / development interface
Unknown

Operating conditions and configuration notes

  • Uses the customer's airless sprayer; walls only, ceilings and sloped ceilings still in development per FAQ.
  • Operator draws a rough floor plan in the app; masking and detail work stay manual.
  • Dismantles into four parts for carrying between floors.

Still missing for ConBotics MalerRoboter 2.0

Payload per arm · Payload · IP rating · Rough ground · Outdoor use · SDK / development interface

Background sources for the capability record

These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.

More detail

Evidence profileShow

Robot evidence profile

Checked

Evidence for each configuration

Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.

ConBotics MalerRoboter 2.01 published claim · 2 pilots · 5 missing capability fields

Configuration: 2.0

  1. Pilot

    Wall coating on a pilot project

    Nietiedt (painting and construction contractor), Germany · Event date not recorded

    ConBotics GmbH ↗ · Manufacturer source · checked

  2. Pilot

    Painting robot used and advised on by a master painter

    Malermeister Sachs (master painter) · Event date not recorded

    ConBotics GmbH ↗ · Manufacturer source · checked

  3. Published claim

    Wall coating in a new hospital building and in a garage and basement

    Location not recorded · Event date not recorded

    Maker describes these projects on its home page without naming the customer, so they are not counted as a named deployment.

    ConBotics GmbH ↗ · Manufacturer source · checked

What is still missing

Payload per arm · Payload · IP rating · Rough ground · Outdoor use

  • Purchase price and whether purchase (not only rental) is open to all German buyers today.
  • Which weight and runtime apply to revision 2.0 (page gives 130/140 kg and 4/8 h).
View configuration specifications and source text

Sources

2 pages